ArticleGPIB

Dernière modification : -
// 2013/05/29 22:25 / 2.11.101.151
// 2013/05/30 02:01 / 2.11.101.151
!! Carte National Instruments PCI

{{$ lspci -v
00:05.0 Communication controller: National Instruments PCI-GPIB (rev 01)
Flags: bus master, medium devsel, latency 64, IRQ 18
Memory at dffff000 (32-bit, non-prefetchable) [size=2K]
Memory at dfff8000 (32-bit, non-prefetchable) [size=16K]
Expansion ROM at dffe0000 [disabled] [size=16K]
}}

!! Paquets Ubuntu

{{$ dpkg -l |grep gpib
ii gpib-modules-source 3.2.06-3.2ubuntu1 kernel modules for various GPIB boards
ii libgpib-bin 3.2.06-3.2ubuntu1 libgpib support applications and configurati
ii libgpib0 3.2.06-3.2ubuntu1 C bindings for GPIB (IEEE 488) kernel driver
ii libgpib0-dev 3.2.06-3.2ubuntu1 C bindings for GPIB (IEEE 488) kernel driver
ii python-gpib 3.2.06-3.2ubuntu1 libgpib python bindings (default package)
}}

''gpib-modules-source'' n'est pas nécessaire car il ne compile pas avec un noyau > 2.6.8.

!! Install driver
Compilation / installation du driver. La version dispo dans [Ubuntu est HS|https://bugs.launchpad.net/ubuntu/+source/gpib/+bug/242986]. Télécharger la [version 3.2.11|http://sourceforge.net/project/showfiles.php?group_id=42378&package_id=118327]

{{$ cd ~/sources/install/gpib/linux-gpib-3.2.11/
$ ./configure
$ make
$ sudo make install
$ sudo modprobe tnt4882
failed to configure base address
failed to configure board
main: Invalid argument
FATAL: Error running install command for tnt4882
}}

Modifier le fichier ''/etc/gpib.conf'' pour ajouter le device et éventuellement la carte :
{{device {
minor = 0
name = "7150plus"
pad = 16
sad = 0
}
}}

puis

{{$ sudo gpib_config}}

Test du fonctionnement
{{$ cd examples
sudo ./ibtest
Do you wish to open a (d)evice or an interface (b)oard?
(you probably want to open a device): d
enter primary gpib address for device you wish to open [0-30]: 16
trying to open pad = 16 on /dev/gpib0 ...
You can:
w(a)it for an event
write (c)ommand bytes to bus (system controller only)
send (d)evice clear (device only)
change remote (e)nable line (system controller only)
(g)o to standby (release ATN line, system controller only)
send (i)nterface clear (system controller only)
ta(k)e control (assert ATN line, system controller only)
get bus (l)ine status (board only)
go to local (m)ode
change end (o)f transmission configuration
(q)uit
(r)ead string
perform (s)erial poll (device only)
change (t)imeout on io operations
request ser(v)ice (board only)
(w)rite data string
: w
enter a string to send to your device: G
sending string: G

gpib status is:
ibsta = 0x2100 < END CMPL >
iberr= 0

ibcnt = 2
: r
enter maximum number of bytes to read [1024]: 34
trying to read 34 bytes from device...
received string: '+25.65000 DEGC
+25.65000 DEGC
'
Number of bytes read: 34
gpib status is:
ibsta = 0x100 < CMPL >
iberr= 0
ibcnt = 34
: m
Go to local sent.
gpib status is:
ibsta = 0x100 < CMPL >
iberr= 0
: q
}}

!! Python

Un programme Python qui fait la même chose que ci-dessus :
{{from Gpib import *
m = Gpib("7150plus")
m.write("G")
print m.read(17)
}}

!! debian testing (jessie)
{{
aptitude install build-essential linux-headers-`uname -r`
wget linux-gpib-3.2.17.tar.gz
tar xvzf linux-gpib-3.2.17.tar.gz
cd linux-gpib-3.2.17/
./configure
make
sudo checkinstall -D make install
# sudo checkinstall -D make install # marche pas :(
sudo make install # y'a des erreurs mais ça semble ok ?
}}